Configuration: System; Overview; What You Can Do In This Chapter; The Ipv4 Screen - ZyXEL Communications GS1900-8 User Manual

18.1 Overview

This section provides information for System in Configuration.

18.1.1 What You Can Do in this Chapter

• The IP screen
• The Time screen
• The Information screen
18.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.

18.2.1 The IPv4 Screen

Use this screen to view the IPv4 interface status and Switch's management IPv4 addresses. Click
Configuration > System > IP > IPv4 to open this screen.
Figure 88 Configuration > System > IP > IPv4
C

Configuration: System

(Section 18.2 on page 96) displays IPv4 and IPv6 settings.
(Section 18.3 on page
(Section 18.4 on page
GS1900 Series User's Guide
96
HAPTER
98) displays the system time and SNTP settings.
99) displays the system information.
1 8