ZyXEL Communications GS1900-8 User Manual page 46

Each field is described in the following table.
Table 13 Getting Start > Start up > 3 Step 3 Finish
LABEL DESCRIPTION
Host Name This field displays a host name.
IP Address The Switch needs an IP address for it to be managed over the network. The factory
default IP address is 192.168.1.1.
Subnet Mask The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
Gateway Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
NTP(Network Time This field displays the NTP time servers from which the Switch gets the time and date.
Protocol)
Username The default username is admin and associated default password is 1234.
Password The default username is admin and associated default password is 1234.
Previous Click Previous to show the previous screen.
Finish Review the information and click Finish to create the task.
VLAN
In VLAN, you can create VLAN, tag VLAN setting, and view finished results.
In order to create VLAN, please do the following. Click Getting Start > VLAN > 1 Step 1 Create
VLAN to access this screen.
Figure 40 Getting Start > VLAN > 1 Step 1 Create VLAN
Chapter 6 Getting Start
GS1900 Series User's Guide
46