Table 168 Configuration > Management > SNMP > Trap Destination > Add/Modify (continued)
LABEL
User Name
UDP Port
Apply
Cancel
31.4 Error Disable
31.4.1 The Error Disabled Screen
Use this screen to configure the Error Disabled settings. Click Configuration > Management >
Error Disable to open this screen.
Figure 203 Configuration > Management > Error Disable
The following table describes the labels in this screen.
Table 169 Configuration > Management > Error Disable
LABEL
Error Disabled Settings
Recovery
Interval
Broadcast Flood
Unknown
Multicast Flood
Unicast Flood
Port Security
POE Inline
Power
Chapter 31 Configuration: Management
DESCRIPTION
Displays the user name that this entry belongs to.
Enter a UDP port for this entry.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Enter the recovery interval value.
Select an option to Enable or Disable the Broadcast Flood.
Select an option to Enable or Disable the Unknown Multicast Flood.
Select an option to Enable or Disable the Unicast Flood.
Select an option to Enable or Disable the Port Security.
Select an option to Enable or Disable the POE Inline Power.
GS1900 Series User's Guide
207