The Router Port Screen; The Add/Edit Router Port Screen - ZyXEL Communications GS1900-8 User Manual

Table 102 Configuration > Multicast > IGMP > VLAN > Modify (continued)
LABEL
Last Member Query
Count
Interval (sec)
Querier
IGMP Querier
State
IGMP Querier
Version
Apply
Cancel

25.2.4 The Router Port Screen

Use this screen to view the Router Port settings. Click Configuration > Multicast > IGMP >
Router Port to open this screen.
Figure 137 Configuration > Multicast > IGMP > Router Port
The following table describes the labels in this screen.
Table 103 Configuration > Multicast > IGMP > Router Port
LABEL
Router Port
Add
VLAN ID
Static Router
Ports
Forbidden
Router Ports
Action
Edit
Delete

25.2.5 The Add/Edit Router Port Screen

Use this screen to configure the Router Port settings. Click Configuration > Multicast > IGMP
> Router Port > Add/Modify to open this screen.
Chapter 25 Configuration: Multicast
DESCRIPTION
Enter the number of queries.
Enter the amount of time (in seconds) between the IGMP group-specific queries sent by an
upstream port when an IGMP Done message is received.
Select the IGMP querier status to Enable or Disable the function.
Select the IGMP Querier version to v2 or v3.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click Add to create a new Router Port entry.
Displays the ID of a static VLAN; the valid range is between 1 and 4094.
Displays the ports that are defined as static router ports.
Displays the ports that are defined as forbidden router ports.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
GS1900 Series User's Guide
145