31.1 Overview
This section provides information for Management in Configuration.
Use the Management screens to configure settings on the Switch. The following submenus are
accessed from this section: Syslog, SNMP, Error Disable, HTTP/HTTPS, Users, Remote
Access Control.
31.2 Syslog
31.2.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > Management > Syslog to
open this screen.
Figure 188 Configuration > Management > Syslog
The following table describes the labels in this screen.
Table 154 Configuration > Management > Syslog
LABEL
Global
State
Apply
Cancel
C
Configuration: Management
DESCRIPTION
Select the global logging setting to be enabled or disabled.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
196
HAPTER
3 1