ZyXEL Communications GS1900-8 User Manual page 167

Table 123 Configuration > LLDP > Local Information > Edit (continued)
LABEL DESCRIPTION
Location Coordinates
Latitude Latitude SHOULD be normalized to within 0-90 degrees with a maximum of 4 digits.
It is possible to specify the direction to either North of the equator or South of the
equator.
Longitude Longitude SHOULD be normalized to within 0-180 degrees with a maximum of 4 digits.
It is possible to specify the direction to either East of the prime meridian or West of the
prime meridian.
Altitude Altitude SHOULD be normalized to within -32767 to 32767 with a maximum of 4 digits.
It is possible to select between two altitude types (floors or meters).
Meters: Representing meters of Altitude defined by the vertical datum specified.
Floors: Representing altitude in a form more relevant in buildings which have different
floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a building, and
represents ground level at the given latitude and longitude. Inside a building, 0.0
represents the floor level associated with ground level at the main entrance.
Map Datum The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime
Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian Name:
Greenwich; The associated vertical datum is the North American Vertical Datum of 1988
(NAVD88). This datum pair is to be used when referencing locations on land, not near tidal
water (which would use Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name:
Greenwich; The associated vertical datum is Mean Lower Low Water (MLLW). This datum
pair is to be used when referencing locations on water/sea/ocean.
Location Civic IETF Geopriv Civic Address based Location Configuration Information (Civic Address LCI).
Address
• Country code: The two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US.
• State: National subdivisions (state, canton, region, province, prefecture).
• County: County, parish, gun (Japan), district.
• City: City, township, shi (Japan) - Example: Copenhagen.
• City district: City division, borough, city district, ward, chou (Japan).
• Block (Neighborhood): Neighborhood, block.
• Street: Street - Example: Poppelvej.
• Leading street direction: Leading street direction - Example: N.
• Trailing street suffix: Trailing street suffix - Example: SW.
• Street suffix: Street suffix - Example: Ave, Platz.
• House no.: House number - Example: 21.
• House no. suffix: House number suffix - Example: A, 1/2.
• Landmark: Landmark or vanity address - Example: Columbia University.
• Additional location info: Additional location info - Example: South Wing.
• Name: Name (residence and office occupant) - Example: Flemming Jahn.
• Zip code: Postal/zip code - Example: 2791.
• Building: Building (structure) - Example: Low Library.
• Apartment: Unit (Apartment, suite) - Example: Apt 42.
• Floor: Floor - Example: 4.
• Room no.: Room number - Example: 450F.
• Place type: Place type - Example: Office.
• Postal community name: Postal community name - Example: Leonia.
• P.O. Box: Post office box (P.O. BOX) - Example: 12345.
Chapter 27 Configuration: LLDP
GS1900 Series User's Guide
167