2) Remove the HR handlebars as outlined in Section 5.2.
3) Lift up the rubber boot at the bottom of the console mast (Figure A), and remove the 5 screws holding the console mast to the frame (Figure B).
FIGURE A
FIGURE B
4) Pull the wires out the bottom of the console mast and remove the mast (Figure C).
FIGURE C
5) When installing a new console mast, be sure to pull the console wires up through the new mast prior to installing the 5 screws removed in Step 3 into
the frame.
6) Test the bike for function as outlined in Section 5.20.