Heart Rate Handlebar Replacement - Vision Fitness U70-02 Service Manual

CHAPTER 5: PART REPLACEMENT GUIDE

5.2 Heart Rate Handlebar Replacement

1) Remove the 4 screws holding the heart rate handlebar to the console mast being careful to support the handlebar (Figure A).
FIGURE A
2) Carefully pull the wires from the console mast until the connectors are showing, and then disconnect the 3 wires from the handlebar and remove the
defective handlebar (Figure B).
FIGURE B
3) Reverse Steps 1-2 to install a new handlebar.
4) Test the bike for function as outlined in Section 5.20.
20