Stamina Total Body Pro Elliptical 55-1702 Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 4
Refer to illustration 1 below. Turn the TENSION KNOB(31) counterclockwise as far as it can go, so the HOOK
moves down to the lowest position. Remove the black strap from the TENSION CABLE(30). Connect the
CABLE END of the TENSION CABLE(30) to the HOOK on the TENSION KNOB(31) as shown in illustration
2. Pull firmly on the TENSION CABLE(30) so that enough cable is available to insert its PLUG END into
the SOCKET of the TENSION KNOB(31). The TENSION KNOB(31) and the TENSION CABLE(30) should
look as shown in illustration 3. Adjust the TENSION KNOB(31) and verify that the HOOK moves when the
TENSION KNOB(31) is adjusted.
STEP 5
Hook
the TENSION KNOB(31) into the square hole on the UPRIGHT(6) and secure with FLAT HEAD
SCREW(M5x0.8x15mm)(67).
1. 2. 3.
Hook
Hook
Cable End
Socket
Plug End
9