Fit the air filter and make sure it is
correctly seated (arrows).
72
12.2
Carburetor
12.2.1 Removing and Installing
– Troubleshooting chart –
– Remove the filter base
–
see
12.1.
– Open the tank cap to release
internal pressure.
– Close the tank cap.
Use a screwdriver to press the
throttle shaft down and
disconnect the throttle rod.
1
Pull the hose (1) off the
carburetor.
– Remove the carburetor.
see
4.5.
Before fitting the carburetor,
check that the sleeve (1) and
washer (2) are in position.
Reassemble in the reverse
sequence.
1
2
MS 270, MS 280