8.5.1
ElastoStart
– Remove the fan cover with
rewind starter –
see
8.2.
– Relieve tension of rewind spring
–
see
8.4.
1
Pry the cap (1) out of the starter
grip.
1
2
Pull starter rope and, if
necessary, the spring element (2)
out of the grip (1).
Undo the knot (arrow) in the
starter rope.
MS 270, MS 280
– Pull the grip and, if necessary, the
spring element off the starter
rope.
3
1
2
Thread end of new starter rope
through the grip (1) and the
spring element (2) – if removed.
Tie a simple overhand knot in the
end of the rope.
Pull the rope and spring element
into the grip and then fit the
cap (3).
– Tension the rewind spring
–
see
8.5.2.
– Fit fan cover with rewind starter
–
see
8.2.
8.5.2
Tensioning
Make a loop in the starter rope.
Grip the rope next to the rotor (in
area of arrow) and use it to turn
the rope rotor six times
clockwise.
57