5.4.2
Removing
Troubleshooting chart –
see
– Remove the chain sprocket
cover, bar and chain – wear work
gloves to protect your hands from
injury.
– Remove the clutch drum/chain
sprocket –
see
5.1.
2
1
Take out the screw (1).
Remove the side plate (2).
– Engage the chain brake by
pushing the hand guard away
from the front handle.
MS 270, MS 280
4.1.
Take out the screws (arrows).
Remove the cover (1).
– Relieve tension of brake spring
by pushing hand guard forward.
1
Carefully ease the brake
spring (1) off the anchor pin and
take it off the bell crank (2).
Take out the screw (arrow).
1
Pry the brake band out of the
crankcase.
2
1
Remove the brake band (1) from
the lugs on the crankcase.
Disconnect the brake band from
the bell crank (2).
2
21