Stihl MS 270 User Manual page 29

5.5.4 Adjusting Play
Release twist lock (1) and
lift away the carburetor box
cover (2).
2
1
Use a 6mm open-end wrench to
adjust play on nut (1).
Turn wrench to right to reduce
play.
Turn wrench to left to increase
play.
Remove the switch shaft (2),
see 10.1, if it gets in the way of
adjustments.
Reassemble in the reverse
sequence.
MS 270, MS 280
5.5.5 Brake Cable
Machines with QuickStop Super
2
have an additional brake cable.
1
– Remove the switch shaft
– see 10.1.
– Remove brake cable from switch
lever – see 10.2.2.
– Separate crankcase and tank
housing – see 9.2.2.
1
Ease the support (1) upwards
and push it in the direction of the
cylinder.
1
Pull the cable (1) out of the tank
housing in the direction of the
cylinder.
– Remove the brake spring
– see 5.5.1.
Disconnect coasting brake
cable (1) from the brake lever (2).
1
Pull the brake cable (1) out of the
crankcase in the direction of the
rear handle.
Reassemble in the reverse
sequence.
2
1
29