Announcement; Play Your Announcement; Record Your Own Announcement - AT&T TL92271 User Manual

Answering system
Answering system settings

Announcement

An announcement is the greeting callers hear when calls are answered by
the answering system.
The telephone is preset with a greeting that answers calls with "Hello, please
leave a message after the tone." You can use this default announcement, or
replace it with your own.

Play your announcement

MENU
1. Press
main menu.
CID or DIR to highlight Answering sys, then
2. Press
press SELECT.
3. Press SELECT
4. The handset displays ANNOUNCEMENT. Press PLAY.

Record your own announcement

1. Press MENU
main menu.
CID or DIR to scroll to Answering sys, then
2. Press
press SELECT.
SELECT
3. Press
The handset displays ANNOUNCEMENT. Press RECORD.
4.
5. The handset announces, "Record after the tone. Press
STOP when you are done." After the tone, speak towards
the microphone of the handset.
6. Press STOP when you finish recording.
7. The handset automatically plays back the newly recorded announcement.
Press STOP to stop the playback at any time. After the announcement
playback, press
to record again if desired.
NOTES:
• Your announcement can be up to 90 seconds in length.
• Announcements shorter than two seconds are not recorded.
on the handset in idle mode to enter the
again to select Announcement.
on the handset in idle mode to enter the
again to select Announcement.
PLAY
to replay the recorded announcement, or
75
ANSWERING SYS
Announcement
Delete al l old
Record memo
BACK SELECT
ANNOUNCEMENT
PLAY RECORD
Recording
announcement...
STOP
Announcement
playback
DELETE STOP
RECORD