Glossary Of Terms - AT&T TL92271 User Manual

Bluetooth

Glossary of terms

Below are some terms used in this user's manual to help you become familiar
with using your Bluetooth devices and your new AT&T telephone system.
Active device slots - the Device list has two active slots for two cell phones,
or one cell phone and one headset. When a device in the list is active it will
have a D1: or D2: in front of the device name. In order to use a Bluetooth
device on a call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELLULAR line - the telephone line associated with your cell phone service.
On your TL92271/TL92371/TL92471 handset, press CELLULAR to use
the cell line.
Connected - when you pair a Bluetooth device to the TL92271/TL92371/
TL92471
it is placed in an active slot and automatically connected. When a
device is connected, a 1 and/or 2 will display after on the handset screen
and the DEVICE 1 and/or DEVICE 2 light on the telephone base will be on. If
a device loses its connection to the telephone base, it must be reconnected
TL92271/TL92371/TL92471.
before you can use the device with the
/ /
Disconnected - when a device is disconnected, 1 and/or 2 displays after
on the handset screen and the DEVICE 1 and/or DEVICE 2 light on the
telephone base is off.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base
is in this mode. When pairing a headset, the headset must be set to this
mode. Depending on the manufacturer, this mode is sometimes referred to as
Find Me or Visibility.
HOME line - your conventional telephone land line. On your TL92271/
TL92371/TL92471 handset, press HOME/ to use the home line.
FLASH
Paired devices - Bluetooth enabled devices (cell phone or headset) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired with the telephone base. However,
only two paired devices can be connected to the base at a time.
Pairing - sometimes refers to as bonding. The process of sharing
registration information between two Bluetooth enabled devices. Your
Bluetooth enabled cell phone or headset must first be paired to the
telephone base in order to use it with this cordless phone system.
PIN - by default, the PIN is 0000 for the telephone base and for most
Bluetooth devices. PIN information must be exchanged between Bluetooth
devices before they can be used. This is also known as a Passkey or Passcode.
13