Speed Dial; Assign A Speed Dial Slot; Reassign A Speed Dial Slot; Dial A Speed Dial Entry - AT&T TL92271 User Manual

Directory

Speed Dial

You can assign 10 of your directory entries to a speed dial location (0-9). The
speed dial entries are shared by all handsets.

Assign a speed dial slot

Up to 10 speed dial entries can be stored. The speed dial number must be
created from an existing entry in the Home or Bluetooth directory.
1. Press MENU
2. Press CID or DIR to highlight Directory, then press SELECT.
Press CID or DIR to highlight Speed dial, then press REVIEW.
3.
4. Press CID or DIR to highlight an empty slot, then press ASSIGN.
Press CID or DIR to highlight the desired directory, then press REVIEW.
5.
6. Search for the desired entry in the directory (see Review the directory
or 3-character alphabetical search on page 63). When the desired entry
appears, press ASSIGN. You hear a confirmation tone.

Reassign a speed dial slot

MENU
1. Press
2. Press CID or DIR to highlight Directory and then press SELECT.
3. Press CID or DIR to highlight Speed dial, then press REVIEW.
Press CID or DIR to highlight the desired slot.
4.
5. Press ASSIGN. The handset displays the directory at the current
assigned entry.
6. Search for the desired entry in the directory (see Review the directory
or 3-character alphabetical search on page 63). When the desired entry
appears, press ASSIGN.
7. The handset displays Entry B replaces Entry A Accept? Press
confirm. You hear a confirmation tone.

Dial a speed dial entry

1. Press and hold a desired speed dial slot (0-9).
HOME/
2. Press
to use the cell line.
on handset when it is not in use.
in idle mode.
/SPEAKER to use the home line
or
FLASH
66
YES to
CELLULAR
or
,