Add A Headset - AT&T TL92271 User Manual

Bluetooth
Bluetooth setup

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's manual
to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU
main menu.
2. Press CID or
press SELECT.
SELECT
3. Press
4. Press CID or
press SELECT. The screen displays Please wait... followed
by If headset is connected to cell, please disconnect it.
• If there is another headset already active, the screen
shows Only 1 headset in device list can be ready for
connection and prompt you to replace an existing
paired device (page 21).
• When you already have 2 active devices, the handset
shows Only 2 devices can be ready for connection.
The telephone base will deactivate another headset
from an active slot automatically.
5. Press NEXT.
discoverable mode. Set your headset to discoverable
mode (refer to the user's manual of your headset), then
press NEXT.
• All devices that are connected to the telephone base
are temporarily disconnected.
6. The screen displays Searching for Bluetooth headsets...
When the screen displays the found devices, press CID
7.
or DIR to highlight your headset and then press SELECT.
8. Enter the PIN of your headset. The PIN for most
Bluetooth devices is 0000 (refer to the user's manual of
your headset). Then press NEXT.
on the handset in idle mode to enter the
DIR to highlight Bluetooth, then
to choose Add device.
DIR to highlight Add headset, then
The screen displays Pls set headset to
16
Play messages
Answering sys
Directory
Cal ler ID log
BACK SELECT
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
ADD DEVICE
Add cel lular
Add headset
BACK SELECT
If headset is
connected to
cel l, please
disconnect it.
NEXT
Pls set headset
to discoverable
mode
BACK NEXT
Searching for
Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B
BACK SELECT