Call Screening - AT&T TL92271 User Manual

Answering system
Answering system settings
In the answering system setup menu, you can change the settings for call
screening, number of rings, remote access code and message alert tone and
recording time.

Call screening

The call screening feature lets you listen at the telephone base to a caller
leaving a message. While monitoring an incoming message, you can answer
the call by pressing
To change the settings:
1. Press MENU
2. Use CID or DIR to scroll to Answering sys, then
press SELECT.
3. Use CID or DIR to scroll to Ans sys setup, then
press SELECT
4. Press CID or DIR to choose between On and Off, then
press SET to save. You hear a confirmation tone.
NOTE: For more information on call screening, see page 82.
HOME/
FLASH
on the handset in idle mode to enter the main menu.
twice to select Call screening.
or /SPEAKER on the
77
handset.
ANS SYS SETUP
Cal l screening
# of rings
Remote code
BACK SELECT
CALL SCREENING
On
Off
BACK SET