Ricoh DSm651 Operating Instructions Manual page 70

User Tools (System Settings)
❖ ❖ ❖ ❖ Tray Paper Size: (Tray 2,3)
You can select the size of the copy paper loaded in the paper tray.
• The paper sizes you can load for trays, when the paper size selector knob
is set to the p mark, are as follows:
• A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5K, A5L, 210 × 340
mmL, 210 × 182 mmK, 210 × 170 mmK
• 11"×17"L,
1
8 /
11"×15"L, 11"×14"L, 10"×15"L, 8
(139.7-297 mm(5.5"-11.7") wide × 139.7-431.8 mm(5.5"-17") long)
• 8K(267 × 390 mm)L, 16K(195 × 267 mm)K, 16K(195 × 267 mm)L
Important
❒ If the specified paper size differs from the size of paper actually set in the
4
paper tray, a paper misfeed might occur because the paper size cannot be
detected accurately.
Note
❒ Default: 8
❒ The tray fence for the optional large capacity tray (LCT) is fixed. If you
need to change the paper size, contact your service representative.
❒ The optional tab sheet holder is required when using tab stock in tray 2 or
3.
Reference
See p.115 "Changing the Paper Size".
❖ ❖ ❖ ❖ Paper Type: Bypass tray
You can sets the display to show the type of paper loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
• Plain paper (No Display), Recycled Paper, Special Paper, Color Paper 1,
Color Paper 2, Translucent Paper, Letterhead, Thick Paper, Label Paper,
OHP, Cardstock, Bond Paper, Prepunched Paper, Preprinted Paper
Note
❒ Default: No Display
❖ ❖ ❖ ❖ Paper Type: (Tray1-3, LCT)
You can sets the display to show the type of paper loaded in each of the trays.
This information is used by the print function to automatically select the pa-
per tray.
• The paper types you can set for trays are as follows:
• Plain paper (No Display), Recycled Paper, Special Paper, Translucent
Paper, Letterhead, Thick Paper, Color Paper 1, Color Paper 2, Tab Stock
(2-3 tray), Bond Paper, Prepunched Paper, Preprinted Paper
58
1
8 / "×14"L,
2
"×13"L, 8"×13"L, 7
4
" × 11"K
1
/
2
1
8 / "×13"L, 8
2
1 1 1
/ "×10 / "L, 5 /
4 2 2
1
/ "×14"L, 8"×10
4
1 1
/ "×11"K, 8 / "×11"L,
2 2
1 1 1
"×8 / "K, 5 / "×8
2 2
1
/ "L, custom size
2
/ "L,
2