Windows Xp, Windows Server 2003 - Usb - Ricoh DSm651 Operating Instructions Manual

Windows Configuration

Windows XP, Windows Server 2003 - USB

Important
1 ❒ Installing a printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
When USB is first used, Found New Hardware Wizard starts, and USB Printing
Support is installed automatically.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the "USB" port is added to the [Printers] window.
The printer drivers can be installed from the CD-ROM provided with this machine.
If the printer driver is not installed, follow the plug-and-play instructions of the
printer to install it from the CD-ROM provided.
A A A A
Turn off the power of the printer.
B B B B
Connect the machine with the computer via USB cable.
Connect the USB cable firmly.
C C C C
Turn on the power of the machine.
D D D D
In the Found New Hardware Wizard display, click [Search for a suitable driver
for my device [recommended] ], and then click [Next>].
E E E E
To disable Auto Run, press the left { { { { SHIFT} } } } key when inserting the CD-
ROM into the drive and keep it pressed until the computer finishes reading
from the CD-ROM.
Note
❒ If Auto Run starts, click [Cancel], and then [Exit].
F F F F
Select the [Include this location in the search] check box under [Search for the best
driver in these location], and then click [Browse] to select the printer driver lo-
cation.
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
G G G G
Check the printer driver location, and then click [Next].
H H H H
Click [Continue].
I I I I
Click [Finish].
If installation is successful, the icon of the printer connected to the "USB001"
port is added to the [Printers] window.
Note
❒ The number after "USB" varies depending on the number of printers connected.
34