Using Connect Copy - Ricoh DSm651 Operating Instructions Manual

Connect Copy

Using Connect Copy

You can select Connect Copy from ei-
ther machine by pressing [Connect].
The machine on which you pressed
[Connect] and made Connect Copy
settings becomes the main machine,
and the other the sub-machine.
Limitation
❒ Once Connect Copy has been se-
3
lected, you must carry out all oper-
ations on the main machine.
Note
❒ You can specify with the User
Tools whether [Connect]is dis-
played or not. See p.125 "Connect
Copy Key Display".
A A A A
Make sure "d
on the display.
B B B B
Press [Connect] on the machine
that you want to use as the main.
[Connect]becomes highlighted, and
the two machines are connected.
❖ ❖ ❖ ❖ Main machine
88
d Ready" is shown
d d
❖ ❖ ❖ ❖ Sub-machine
C C C C
Set the originals on the main ma-
chine.
Reference
See p.9 "Placing Originals".
D D D D
Make the necessary settings us-
ing the main machine.
Note
❒ If you have made any copy set-
tings before using Connect
Copy, the settings remain effec-
tive. However, if optional fin-
ishers are not installed on both
main and sub machines, the
Stack, Staple, Punch and Z-fold
functions are automatically dis-
abled.
❒ To exit Connect Copy, press
[ ] on the main machine
again.
Reference
See p.19 "Copying".
E E E E
Enter the required number of cop-
ies using the number keys.
Note
❒ The maximum copy quantity
that can be set is 999.
❒ If you have entered the wrong
value, press the { { { { Clear/Stop} } } } key
and enter again.