Powermatic PM1000 RU Operating Instructions And Parts Manual page 9

Materials:
Main table ......................................................................................................................................... ground cast iron
Extension wings ................................................................................................................................ ground cast iron
Trunnion ....................................................................................................................................................... cast iron
Enclosed cabinet ................................................................................................................................................ steel
Table:
Main table dimensions ................................................................................................ 20" L x 27" W (508 x 686 mm)
Table dimensions with wings .................................................................................... 40" L x 27" W (1016 x 686 mm)
Table area in front of blade at maximum height .................................................................................... 10" (305 mm)
Table height from floor, approximate .............................................................................................. 34-1/4" (870 mm)
Miter T-slot ......................................................................................................... two at 3/4" W x 3/8" D (19 x 10 mm)
Edge bevel ........................................................................................................................................................... front
Dimensions:
Cabinet footprint ................................................................................................... 23" W x 24-1/2" L (584 x 622 mm)
Overall dimensions of shipping carton (cabinet only) .......... 30-1/2" L x 27-1/2" W x 43-3/4"H (77.5 x 70 x 111.4 cm)
Overall dimensions, fully assembled, accessories mounted:
with 30" rip ................................................................................. 43" W x 61" L x 44" H (1092 x 1549 x 1117 mm)
with 52" rip ................................................................................. 43" W x 83" L x 44" H (1092 x 2108 x 1117 mm)
Dust collection:
Two Way Dust port outside diameter ..................................................................................................... 100 mm/60m
Minimum extraction volume required ............................................................................................. 350 cfm (18 cmm)
Weights:
Saw Only (Net/Shipping) .................................................................................................................... 289 lb (131 kg)
Saw assembled with 30" Rail/Fence ................................................................................................... 330 lb (150 kg)
Saw assembled with 52" Rail/Fence ................................................................................................... 335 lb (152 kg)
L=length; W=width; D=depth; H=height
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JPW Industries, Inc., reserves the right to change specifications at any time and without prior
notice, without incurring obligations.
9