Monitoring File Transfers (Job List) - Sony PXW-X500 Manual

transferred to the default server specified on the
Upload Settings tab when recording ends.
The default server is set to "Sony Ci" by factory
default.
"Sony Ci" is the Media Cloud Services provided
by Sony. You can transfer files to the "Sony Ci"
cloud service.
Note
A subscription is required in order to use the "Sony Ci"
cloud service. For details, visit www.SonyMCS.com/
wireless.
Use the following procedure to register with
"Sony Ci."
1
Check that "Sony Ci" is displayed on
the [Upload Settings] tab, then click
[Edit].
The "Sony Ci" setup screen appears.
2
Enter a user name and password.
For details, visit www.SonyMCS.com/
wireless.
3
Tap [Link].
A completion message appears after a short
while.
[Link] associates the user with the
camcorder. An Internet connection is
required to execute [Link].
4
Tap [OK].
After registering with "Sony Ci," [Unlink]
appears on the Settings screen. Tapping
[Unlink] releases the user account to enable
other user accounts to link with the
camcorder.
To register a new destination server
Tap [Create New] to display a configuration
screen.
After specifying settings, tap [OK] to apply the
settings. Tapping [Cancel] discards the settings.
Item
Default Server
Display Name
Service
Host Name
User
Password
PASV Mode
Destination
Directory
Using Secure
Protocol
Load Certification
Clear Certification Clears the CA certificate.
Note
Communication using FTP is not encrypted. The use of
FTPS is recommended.
To change registered server settings
Select the server whose settings you want to
change on the Upload Settings screen, then tap
[Edit]. Change the setting on the displayed
configuration screen.
For details about items, see "To register a new
destination server" (page 108).
To delete a registered server
Select the server you want to delete on the Upload
Settings screen, then tap [Delete]. A confirmation
message appears. Tap [OK] to delete the server
and return to the previous screen.
Monitoring File Transfers (Job
List)
You can monitor file transfer status, manage files
in the transfer file list, and start/stop file transfers.
108
Description
Set to [On] to set the default
file destination server.
(Displayed at the top of the
server list for file transfers.)
Enter the name of the server
to display in the list.
Displays the type of server.
FTP: FTP server
Enter the address of the
server.
Enter the user name.
Enter the password.
Enable/disable PASV mode.
Specify a destination
directory.
Set whether to use secure
FTP.
Load a CA certificate.
* The certificate to be loaded
must be in PEM format, and
should be written to the root
directory of the SD card with
"certification.pem" file name.