Locations And Functions Of Parts; Power Supply - Sony PXW-X500 Manual

Other functions
• The ALAC (automatic lens aberration
correction) function greatly reduces specific
patterns of chromatic aberration caused by the
lens (see page 154).
• The contrast of the video can be appropriately
adjusted using the gamma correction function,
which utilizes the dynamic range of the Power
HAD CCD sensor (see page 142). You can also
create customized gamma curves using user
gammas (see page 176).
• The focus assist function provides for easier
focusing in the viewfinder (see page 27).
Software Downloads
When the unit is used with a PC connection,
download any device drivers, plug-ins, and
application software you require from the
following websites.
Sony Professional products website:
U.S.A. http://pro.sony.com
Canada http://www.sonybiz.ca
Latin America http://sonypro-latin.com
Europe http://www.pro.sony.eu/pro
Middle East, Africa http://sony-psmea.com
Russia http://sony.ru/pro/
Brazil http://sonypro.com.br
Australia http://pro.sony.com.au
New Zealand http://pro.sony.co.nz
Japan http://www.sonybsc.com
Asia Pacific http://pro.sony-asia.com
Korea http://bp.sony.co.kr
China http://pro.sony.com.cn
India http://pro.sony.co.in
Sony Creative Software, software download
page:
http://www.sonycreativesoftware.com/
download/software_for_sony_equipment
Locations and Functions
of Parts

Power Supply

a LIGHT (video light) switch
Determines how a video light connected to the
LIGHT connector (see page 13) is turned on and
off.
AUTO: When the POWER switch of the video
light is in the on position, the video light is
turned on automatically while the camcorder
is recording.
MANUAL: You can turn the video light on or off
manually, using its own switch.
Note
When the camcorder is set for recording in Picture Cache
mode, it is not possible to turn on the light before
operation to start recording is carried out (or while data
is being stored in memory).
b POWER switch
Turns the main power supply on (?) and off (1).
c DC IN (DC power input) connector
(XLR type, 4-pin, male)
To operate the camcorder from an AC power
supply, connect an optional DC power cord to this
terminal and then connect the cord to the DC
11