Connecting Using Wireless Lan Station Mode (Wi-Fi Station Mode) - Sony PXW-X500 Manual

6
Enter a user name and password, then
select [OK].
For the user name and password for access
authentication, see Maintenance >Basic
Authentication (see page 156) in the setup
menu.
Connecting using Wireless LAN
Station Mode (Wi-Fi Station
Mode)
The camcorder can connect to existing wireless
LAN access points as a client.
The device connects via the access point.
Smartphone/
Tablet
To connect to an access point using WPS
If an access point supports the WPS function, you
can connect using a basic setting. If an access
point does not support the WPS function, see "To
connect to an access point in station mode
without using WPS" (page 107).
1
Turn the access point on.
2
Turn the camcorder on.
3
Select Maintenance >Network >Setting
in the setup menu.
Computer
Access
point
4
Turn the MENU knob to select [Wi-Fi
Station], then press the knob.
Note
It may take some time (30 seconds to 1 minute) to enable
station mode. Wait until the network level indicator (see
page 29) stops flashing on the LCD monitor or in the
viewfinder.
5
Select Maintenance >Network >WPS in
the setup menu.
6
Turn the MENU knob to select
[Execute], then press the knob.
7
Press the access point WPS button.
For details about WPS button operation, refer
to the instruction manual for the access point.
When the connection is successful, the
network level indicator (see page 29) will
show a strength of 1 or higher on the LCD
monitor or in the viewfinder.
Note
If the connection fails, perform the procedure again from
step 1.
8
Connect the device to the access point.
For details about how to connect, refer to the
instruction manual for each device.
9
Launch a browser on the device and
enter "http://<IP_address>:8080/
index.html" in the URL bar, where
"<IP_address>" is the IP address
assigned by the access point to the
camcorder.
For the IP address of the camcorder, see
Maintenance >Network >IP Address in the
setup menu. The user name and password
entry screen appears.
10
Enter a user name and password, then
select [OK].
The web menu of the camcorder appears.
For details about the web menu, see "Web
Menu" (page 104).
For the user name and password for access
authentication, see Maintenance >Basic
Authentication (see page 156) in the setup
menu.
93