Sony PXW-X500 Manual page 144

Paint
Item
Detail(HD)/Detail(SD)
Makes settings related to
detail adjustments in HD
mode and SD mode.
Detail adjustment
processing improves the
clarity of images by adding
a detail signal to the
outline of the subject.
Sub-item setting
Setting
On/Off
Level
–99 to ±0 to +99
H/V Ratio
–99 to ±0 to +99
Crispening
–99 to ±0 to +99
Level Depend
On/Off
Level Depend Level
–99 to ±0 to +99
Frequency
–99 to ±0 to +99
Knee Aperture
On/Off
Knee Aperture Level
–99 to ±0 to +99
Limit
–99 to ±0 to +99
White Limit
–99 to ±0 to +99
Black Limit
–99 to ±0 to +99
V Black Limit
–99 to ±0 to +99
V Detail Creation
NAM/Y/G/G+R
Cross Color Suppress
(SD mode)
–99 to ±0 to +99
144
Description
Turns the detail adjustment function on/off.
Sets the detail level.
Sets the mix ratio between the H detail level and
the V detail level.
Sets the crispening level.
Turns the level dependence adjustment function
on/off.
Sets the level dependence level.
Sets the center frequency of the H detail signal
(larger values give finer detail).
Turns the knee aperture correction function on/
off.
Sets the knee aperture level.
Sets the detail limiter for both the white-side and
black-side directions.
Sets the white-side detail limiter.
Sets the black-side detail limiter.
Sets the black-side V detail limiter.
Selects the source signal used to generate the V
detail signal.
NAM: V detail signal created from the R signal,
V detail signal created from the G signal, or V
detail signal created from the B signal,
whichever signal has the highest level
Y: Y signal
G: G signal
G+R: Mixed signal comprising the G signal and
R signal in a 1:1 ratio
Sets the cross color suppression level of the
detail.
Note
This setting is disabled if the detail adjustment
function is Off, and when Operation >Format
>Frequency in the setup menu is set to 50 or 25.