Wi-Fi Multimedia Quality Of Service - NETGEAR Nighthawk X4S R7800 User Manual

The advertisement period specifies how often the router broadcasts its UPnP information. This value can range
from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points receive
current device status at the expense of more network traffic. Longer durations can compromise the freshness
of the device status but can significantly reduce network traffic.
7. Type the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops are the
steps a packet takes between routers. The number of hops can range from 1 to 255. The default value for the
advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some
devices are not being updated or reached correctly, it might be necessary to increase this value.
8. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router and which
ports (internal and external) that device opened. The UPnP Portmap Table also displays what type of port is
open and whether that port is still active for each IP address.
To refresh the information in the UPnP Portmap Table, click the Refresh button.

Wi-Fi Multimedia Quality of Service

Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic over the WiFi link. WMM
QoS is automatically enabled for the router.
WMM QoS prioritizes WiFi data packets from different applications based on four access categories: voice, video,
best effort, and background. For an application to receive the benefits of WMM QoS, WMM must be enabled for
both it and the client running that application. Legacy applications that do not support WMM and applications that
do not require QoS are assigned to the best effort category, which receives a lower priority than voice and video.
To disable WMM QoS:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > QoS Setup.
The Quality of Service page displays.
5. Click the WMM tab.
6. Clear the Enable WMM (Wi-Fi multimedia) settings (2.4 GHz b/g/n) check box.
Nighthawk X4S AC2600 Smart WiFi Router
Optimize Performance
80