NETGEAR Nighthawk X4S R7800 User Manual page 48

Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the router's network settings.
NETGEAR recommends that you install the router and connect it to the Internet before you change its network settings.
This chapter includes the following sections:
• View or Change WAN Settings
• Set Up a Default DMZ Server
• Change the Router's Device Name
• Change the LAN TCP/IP Settings
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Manage Reserved LAN IP Addresses
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Change the WiFi Password or Security Level
• Enable or Disable WiFi MU-MIMO
• Enable or Disable WiFi 160 MHz
• Enable a WiFi Video Network
• Set Up a Guest WiFi Network
• Enable a WiFi Video Network
• Control the WiFi Radios
• Set Up a WiFi Schedule
• Specify WPS Settings
• Use the Router as a Wireless Access Point
• Use the Router in Bridge Mode
on page 49
on page 50
on page 51
on page 51
on page 55
on page 57
on page 58
on page 62
on page 63
on page 63
on page 64
on page 65
on page 64
on page 67
on page 69
on page 70
on page 70
on page 72
on page 53
on page 55
48
4