Enable Port Triggering - NETGEAR Nighthawk X4S R7800 User Manual

10. In the Triggering Port field, enter the number of the outbound traffic port that will open the inbound ports.
11. In the Connection Type, Starting Port, and Ending Port fields, enter the inbound connection information.
12. Click the Apply button.
The service is now in the Portmap Table. You must enable port triggering before the router uses port triggering.
See

Enable Port Triggering

Enable Port Triggering
To enable port triggering:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net .
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
5. Select the Port Triggering radio button.
6. Clear the Disable Port Triggering check box.
If this check box is selected, the router does not use port triggering even if you specified port triggering settings.
7. In the Port Triggering Timeout field, enter a value up to 9999 minutes.
Nighthawk X4S AC2600 Smart WiFi Router
on page 137.
Customize Internet Traffic Rules for Ports
137