Install Openvpn Software On Your Computer - NETGEAR Nighthawk X4S R7800 User Manual

3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN page displays.
5. Select the Enable VPN Service check box.
By default, the VPN uses the UDP service type and uses port 12974. If you want to customize the service type
and port, we recommend that you change these settings before you install the OpenVPN software.
6. To change the service type, scroll down and select the TCP radio button.
7. To change the port, scroll down to the Service Port field, and type the port number that you want to use.
8. Click the Apply button.
Your changes are saved. VPN is enabled in the router, but you must install and set up OpenVPN software on
your computer before you can use a VPN connection.

Install OpenVPN Software on Your Computer

You must install this software on each computer that you plan to use for VPN connections to your router.
To install VPN client software:
1. Visit http://openvpn.net/index.php/download/community-downloads.html.
2. In the Windows Installer section of the page, double-click the openVPN-install-xxx.exe link.
3. Download the file.
Nighthawk X4S AC2600 Smart WiFi Router
Use VPN to Access Your Network
141