NETGEAR Nighthawk X4S R7800 User Manual page 71

To set up the router as an AP:
1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router.
2. Launch a web browser from a computer or wireless device that is connected to the network.
3. Type http://www.routerlogin.net .
A login window opens.
4. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Wireless AP.
6. Select the Enable AP Mode check box.
7. Scroll down and select an IP address setting:
• Get dynamically from existing router. The other router on the network assigns an IP address to this router
while this router is in AP mode.
Nighthawk X4S AC2600 Smart WiFi Router
Network Settings
71