7.
Slide the power supply toward the front of the computer (2), rotate toward the fan so the power
supply clears the lip on the top of the chassis, and then lift the power supply out of the chassis (3).
Figure 6-45
To install the power supply, reverse the removal procedure.
System Board
Description
System board for use in Windows 7 models (includes thermal material)
System board for use in Windows 8 Standard models
System board for use in Windows 8 Professional models
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front fan assembly
4.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules
●
Expansion cards
●
Heat sink
●
96
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Removing the power supply
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Fan Assembly on page
(Memory on page
(Expansion Cards on page
(Heat sink on page
89).
55).
85).
60)
64)
Spare part number
703596-001
703596-501
703596-601
54).