Drive Positions - HP Compaq Pro 6305 Maintenance And Service Manual

No. Guide Screw
1 Black M3 Metric Screws
2 Silver and Blue 6-32 Isolation Mounting Screws
CAUTION:
If you are inserting or removing a drive, shut down the operating system properly, turn off the
computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby
mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and
label the package "Fragile: Handle With Care."

Drive Positions

Figure 6-14
Table 6-2
1 Two 5.25-inch drive bays for optional drives (optical drives shown)
2 One 3.5-inch drive bay for optional drive (media card reader shown)
72 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
To prevent loss of work and damage to the computer or drive:
Drive Positions
Drive Positions
Device
All Drives (except hard drives)
Secondary Hard Drive