Konica Minolta Bizhub-C31P Service Manual page 220

Field Service Ver. 1.0 Apr. 2008
C. LEFT ADJ DUPLEX
Function • Adjusts the left margin of media for double-sided printing.
• To correct a misaligned print image.
LEFT ADJ TRAY 1: Adjust the left margin of duplex print media fed from tray 1
Use
LEFT ADJ TRAY 2: Adjust the left margin of duplex print media fed from tray 2.
LEFT ADJ TRAY 3: Adjust the left margin of duplex print media fed from tray 3.
LEFT ADJ TRAY 4: Adjust the left margin of duplex print media fed from tray 4.
Setting 1. Select [LEFT ADJ DUPLEX] and press the Menu/Select key.
/procedure 2. Select desired tray and press the Menu/Select key.
3. Select desired adjustment amount with the up key /down key
Menu/Select key.
D. TRANSFER POWER
(1) SIMPLEX PASS
Functions • Adjust the 2nd image transfer output (ATVC) on the single-sided pages for each
media type.
Use • To use when the transfer failure at the trailing edge occurs.
Adjustment • The default setting is "0."
Range
Adjustment To increase the ATVC value (in the direction of a foggier image),
Instructions decrease the setting value.
To decrease the ATVC value (in the direction of a less foggy image),
increase the setting value.
Setting/ 1. Select [TRANSFER POWER] and press the Menu/Select key.
Procedure 2. Select [SIMPLEX PASS] and press the Menu/Select key.
3. Select desired media type with the up key /down key
key.
4. Select desired setting value with the up key /down key
Select key.
(2) DUPLEX PASS
Functions • Adjust the 2nd image transfer output (ATVC) on the duplexed pages for each media
type.
Use • To use when the transfer failure at the trailing edge occurs.
Adjustment • The default setting is "0."
Range
Adjustment To increase the ATVC value (in the direction of a foggier image),
Instructions decrease the setting value.
To decrease the ATVC value (in the direction of a less foggy image),
increase the setting value.
Setting/ 1. Select [TRANSFER POWER] and press the Menu/Select key.
Procedure 2. Select [DUPLEX PASS] and press the Menu/Select key.
3. Select desired media type with the up key /down key
key.
4. Select desired setting value with the up key /down key
Select key.
(manual tray.)
-15 to +15 (1 step: 0.2 mm)
-8 to +7
-8 to +7
11. SERVICE MENU
and press the
and press the Menu/Select
and press the Menu/
and press the Menu/Select
and press the Menu/
183