Konica Minolta Bizhub-C31P Service Manual page 165

9. Menu
C. TRAY 2
(1) PAPER SIZE
Function • Sets the size of the media in tray 2.
Use • To specify the size of the media loaded in tray 2.
Setting 1. Select [PAPER SIZE] and press the Menu/Select key.
/procedure 2. Select desired paper size and press the Menu/Select key.
<For North America>
• The default setting is LETTER.
<For other destinations>
• The default setting is A4.
(2) PAPER TYPE
Function • Sets the media type for tray 2.
Use • To specify the type of media loaded in tray 2.
Setting 1. Select [PAPER TYPE] and press the Menu/Select key.
/procedure 2. Select desired paper type and press Menu/Select key.
• The default setting is PLAIN PAPER.
NOTE
• ANY identifies any media type.
D. TRAY 3 / TRAY 4
(1) PAPER SIZE
Function • Automatically detects the set paper size and displays it.
Use • To check the paper size.
Setting 1. Select [PAPER SOURCE] and press the Menu/Select key.
/procedure 2. Select desired feed tray (TRAY 3-4) and press the Menu/Select key.
3. Select [PAPER SIZE] and press the Menu/Select key.
NOTE
• TRAY3/TRAY4 can be selected only when one or more optional lower feeder
units are installed.
(2) PAPER TYPE
Function • Sets the paper type for tray 3 or tray 4.
Use • To specify the type of media loaded in tray 3 or tray 4.
Setting • The default setting is PLAIN PAPER.
/procedure
NOTE
• TRAY3/TRAY4 can be selected only when one ore more optional lower feeder
units are installed.
• ANY identifies any media type.
128
LETTER
ANY "PLAIN PAPER"
ANY "PLAIN PAPER"
Field Service Ver. 1.0 Apr. 2008
A4
RECYCLED
RECYCLED