Diagnosis Menu - Konica Minolta Bizhub-C31P Service Manual

11. SERVICE MENU
J. AIDC MODE
• Sets the frequency of image stabilization that is performed when the main power
Function
switch is turned ON or the machine returns from sleep mode.
Use • MODE1: Always performs image stabilization when the main power switch is turned
• MODE2: Reduces the frequency of image stabilization that is performed when the
Setting • The default setting is MODE1.
/procedure
11.3.4

DIAGNOSIS MENU

A. PRINT MENU
(1) MAINTENANCE INFO
Functions • To produce an output of a list of setting values, adjustment values, total counter val-
ues, and others.
Use • To check the maintenance information.
The items which can be checked are as follows.
Device Caution Information : Process caution information
Count (total)
Coverage (total)
Replace count (total)
Imaging Unit Information
Toner Cartridge Information: Information concerning the toner cartridge
Setting/ 1. Select [MAINTENANCE INFO] and press the Menu/Select key.
Procedure 2. Select [PRINT] and press the Menu/Select key.
PROCESS CAUTION INFORMATION 1
BIT Item
⎯
0
⎯
1
⎯
2
⎯
3
⎯
4
5 IDC Sensor (Front) failure
⎯
6
⎯
7
⎯
8
⎯
9
10 IDC Sensor (Back) failure
186
ON or the machine returns from sleep mode. (Standard mode)
main power switch is turned ON or the machine returns from sleep mode.
(Low mode)
"MODE1"
: Counter value for each color
: Coverage rate for each color
: Number of times IU, TC, transfer belt, transfer roller,
and fuser unit have been replaced.
: Information concerning the imaging unit
1 • IDC sensor output values are out of the specified range.
• Front door open/close, power switch OFF/ON, and normal
0 image stabilization are complete besides the ones listed
above.
1 • IDC sensor output values are out of the specified range.
• Front door open/close, power switch OFF/ON, and normal
0 image stabilization are complete besides the ones listed
above.
Field Service Ver. 1.0 Apr. 2008
MODE2
Description
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯