Konica Minolta Bizhub-C31P Service Manual page 146

Field Service Ver. 1.0 Apr. 2008
Priority
LCD1
PAPER ERROR
17
TRAYX PAPER
ERR
18 OUTPUT FULL
19 MEMORY FULL
20
HOLD JOB
ERROR
Low 21
*1: Only when the optional staple finisher is mounted.
*2: SSSS represents the media size while TTTT shows the media type.
Message
LCD2/LCD3
• The size and type of media specified in the driver is
SSSS *2
• A different size of media from the one specified in the
TTTT *2
• Displays when [TRAY CHAINING] is set to [ON].
• The size and type of media specified in the driver is
SSSS *2
• A different size of media from the one specified in the
TTTT *2
• Displays when [TRAY CHAINING] is set to [OFF].
REMOVE The printed media volume has reached maximum
PAPER capacity in the exit tray of the main body.
REMOVE
The printed media volume has reached maximum
PAPER
capacity in the sub tray of the staple finisher.
(SUB TRAY) *1
REMOVE
PAPER The printed media volume has reached maximum
(MAIN TRAY) capacity in the main tray of the staple finisher.
*1
The volume of data to be printed exceeds the permissi-
PRESS
ble amount of data to be processed by the machine's
CANCEL
memory.
UNABLE TO The specified data of the held job is being received, but
STORE JOB an optional HDD is not installed.
XXXX
When printing a stored job, the printer configuration was
PRESS CAN-
changed since the job was stored.
CEL
8. Description of the control panel
Description
not loaded in any tray.
driver is loaded in the tray at media feeding.
not loaded in the specified tray.
driver is loaded in the specified tray at media feeding.
109