Ethernet - Konica Minolta Bizhub-C31P Service Manual

9. Menu
9.8.2

ETHERNET

NOTE
• When the ETHERNET setting is changed, the printer restarts automatically.
A. TCP/IP
(1) ENABLE
Function • Enables TCP/IP
• To specify that the printer is connected to a TCP/IP network.
Use YES : Enable TCP/IP. Print can be made at TCP/IP environment.
NO : Disable TCP/IP. Print cannot be made at TCP/IP environment.
Setting • The default setting is YES.
/procedure
NOTE
• The following screen displays only when [ENABLE/YES] is selected.
IP ADDRESS/SUBNET MASK/DEFAULT GATEWAY/DHCP/BOOTP/ARP/PING/
HTTP/FTPTELNET/BONJOUR/DYNAMIC DNS/IPP/RAW PORT/SLP/SMTP/
SNMP/WSD PRINT/IPSEC/IP ADDRESS FILTER/IPv6
(2) IP ADDRESS
Function • Sets the IP address of the printer used for the network.
Use • To set the printer's IP address.
Setting 1. Select [IP ADDRESS] and press the Menu/Select key.
/procedure 2. Set desired IP address (first bite) with the up key /down key
key
3. Repeat the above procedures and set the IP address up to fourth bite.
4. Press the Menu/Select key.
NOTE
• When setting the IP address manually, [DHCP/BOOTP] (IP auto acquisition
function) setting is set to [OFF] automatically.
• When IP address is not allocated from the server, the IP address is set auto-
matically within the range "169.254.0.0. to 169.254.255.255."
(3) SUBNET MASK
Function • Sets the subnet mask of the printer used in the network.
Use • To set the printer's subnet mask.
Setting 1. Select [SUBNET MASK] and press the Menu/Select key.
/procedure 2. Set desired subnet mask (first bite) with the up key /down key
key
3. Repeat the above procedures and set the subnet mask up to fourth bite.
4. Press the Menu/Select key.
• The default setting is "000.000.000.000."
146
"YES"
.
.
000.000.000.000 to 255.255.255.255
Field Service Ver. 1.0 Apr. 2008
NO
and press the right
and press the right