Konica Minolta Bizhub-C31P Service Manual page 142

Field Service Ver. 1.0 Apr. 2008
B. Warning messages
Message
Priority
(LCD2/LCD3)
UNABLE TO
High 1
COLLATE JOB
UNABLE TO
2
STAPLE JOB *1
HDD
3
NEAR FULL
MEMORY CARD
4
NEAR FULL
I-UNIT END
5
X
I-UNIT LIFE
6
X
TONER OUT
7
X
TRANS. BELT
8
END OF LIFE
TRANS.ROLLER
9
END OF LIFE
FUSER UNIT
10
END OF LIFE
11 STAPLER EMPTY *1
WASTE TONER
12
NEAR FULL
I-UNIT LOW
13
X
TONER LOW
14
X
PAPER EMPTY
15
TRAY X
INCORRECT
16
I-UNIT X
INCORRECT
17
TONER X
NON SUPPORT
18
CARD
INCORRECT
19
HDD
INCORRECT
20
MEMORY CARD
HUBS
21
NOT SUPPORTED
Print in sets disabled (full hard disk)
(This warning message is displayed during printing.)
When a job with stapling is printing, the number of printed pages
already exceeds the number of pages that can be stapled.
(This warning message is displayed during printing.)
The hard disk space will run out soon.
The compact flash space will run out soon.
Service life of the imaging unit (X) has been reached. (END status)
• Executing the printing with one of Y,M,C,K being at the END will
make the operator call.
Service life of the imaging unit has been reached.
Printing can be continued, but print quality is out of guarantee.
The specified color toner cartridge is empty.
Transfer belt unit service life has been reached.
Transfer roller service life has been reached.
Fuser unit service life has been reached.
The staple finisher has run out of staples. Otherwise, the staples are
almost empty.
The waste toner bottle needs replacement soon.
The specified color imaging unit will run out soon.
(This message appears when SYS DEFAULT MENU/ENABLE WARN-
ING/I-UNIT LOW is set to ON.)
The specified color toner cartridge will run out soon.
(This message appears when SYS DEFAULT MENU/ENABLE WARN-
ING/TONER LOW is set to ON.)
No media in the specified tray.
The specified tray is not installed, but it is set in the printer driver.
The specified color imaging unit is not the correct type.
A print cycle can be initiated, but is run at 1/3 the normal print speed.
The specified color toner cartridge is not the correct type.
A print cycle can be initiated, but is run at 1/3 the normal print speed.
A compact flash card which is inserted is not supported.
The compact flash card will be invalid.
A hard disk which was formatted by other unit is installed.
A compact flash card which was formatted by other unit is installed.
A USB hub is connected to the USB host I/F.
8. Description of the control panel
Description
105