No Roll Unit; Sheet Removed; Sheet Printing Is Selected; Regular Printing Is Selected, But A Roll Is Loaded - Canon iPF850 series Basic Manual

No Roll Unit.

There is remaining roll paper, but because it could not be ad-
vanced, it could not be detected.
No Roll Unit.
No Roll Unit.
The printer has received a print job that specifies Roll 2 (Lower), but the Roll
Unit is not installed.

Sheet removed.

Sheet removed.
Cause
A sheet has come out of
the printer during printing.

Sheet printing is selected.

Sheet printing is selected.
Cause
You have attempted to print on a sheet,
but no sheet is loaded.

Regular printing is selected, but a roll is loaded.

Regular printing is selected, but a roll is loaded.
Cause
A print job for printing on
sheets was sent when a roll
is loaded.

Paper jam.

Paper jam.
"Lift the release lever."
Cause
A paper jam occurred
in the printer during
printing.
146
Cause
Cause
1.
Lift the Release Lever and remove the paper.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet, and
then print.
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
1.
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
Corrective Action
Choose a higher level of Print Quality in the Advanced Settings
of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for
Printing.")
User's Guide
➔
Press the Stop button and stop printing.
1.
Turn the printer off and install the Roll Unit.
Connect the Roll Unit Cable firmly and completely.
2.
Turn the printer on and resend the print job.
Corrective Action
Corrective Action
User's Guide
➔
Corrective Action
P.21
➔
User's Guide
➔
Corrective Action
P.111
➔
P.114
➔
iPF850 Series
Corrective Action
Basic Guide