Printing By Automatically Switching Upper-Level And Lower-Level Roll Papers - Canon TX-3100 Online Manual

Printing by Automatically Switching Upper-level and Lower-
level Roll Papers
You can print by automatically switching Roll 1 and Roll 2 depending on the media type or your purpose.
The procedure for printing by switching the roll papers is as follows:
1. 1. Load roll papers
2. 2. Open the printer driver setup window
3. Select the media type 3.
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
Note
• If Automatically switch paper sources (paper size priority) is grayed out, refer to
Unit Settings in the Printer
4. Select the paper size 4.
From the Page Size list on the Page Setup tab, select the same size as that of the document that was
created with the application software.
5. 5. For Paper Source, select Roll Paper (Auto)
in upper and lower levels of printer
Driver" and set Roll Unit in the Device Information dialog box to Yes.
565
"Reflect Roll