Cutting Mode Not Automatic - Canon iPF850 series Basic Manual

Cutting Mode not Automatic.

Cause
The Stacker is not ready.
Cutting Mode not Automatic.
Cutting Mode not Automatic.
The Stacker is ready to be used, however, the Printer Cutting
Mode is not set to Automatic Cut.
Or Automatic Cutting is not set to Yes in the Printer Driver.
*1:This is for Windows.For Mac OS, it is not set to Printer Default.
*2:This is for Windows.For Mac OS, set to Printer Default and then print again.
150
•
The Stacker Power is on.
•
The Stacker is installed in the right position on the Printer.
Once the preparation is finished, start printing by pressing ▲ or ▼ to select "Print".
When printing without using the Stacker, prepare the following.
•
Remove the Stacker from the Printer.
Move the Stacker sufficiently far away from the Printer.
Once the preparation is finished, start printing by pressing ▲ or ▼ to select "Print".
Stop printing by pressing ▲ or ▼ to select "Stop Printing".
Cause
Corrective Action
After removing the Stacker, start printing by pressing ▲ or ▼ to
select "Print again".
( *1 )
Stop printing by pressing ▲ or ▼ to select CANCELED.
Set Cutting Mode to Automatic Cut in the Control Panel menu
and then print again.
Alternatively, set Automatic Cutting to Yes in the Printer Driver
and then print again. ( *2 )
iPF850 Series
Corrective Action
Basic Guide