SETTING ITEMS
3
Enter the password and press [OK].
1
2
4
Press [RETYPE NEW PASSWORD], enter
the same password again, and then press
[OK].
3
4
• Up to 20 alphanumeric characters (including the
following symbols) can be entered for the passward.
You can use alphanumerics and the following symbols.
# $ ( ) * + , - . / : ; = ? @ \ ^ _ ` { | } ~
5
Press [OK].
5
6
Memo
• It can be set also on the TopAccess menu.
7
INITIALIZE FAX
You can set the country or region in which you use this
equipment.
You can also restore the default of the FAX settings.
Note
• You need to reboot this equipment after changing the
country/region or initializing the FAX setting.
Setting the country/region of FAX
1
Press the [SETTING] button on the control
panel to access the SETTING menu.
2
Press the [ADMIN] tab.
3
Press [PASSWORD].
4
Enter the administrator password and
press [OK].
Memo
• If the administrator password has not been changed before,
enter the default administrator password "123456".
• The input password appears as asterisks (*).
• For detail, refer to "Accessing the User Menu" (
5
Press [INITIALIZE FAX].
Note
• You cannot perform this operation while a job in
process exists. Perform this operation again after the
job in process is completed.
- 157 -
P.229)