Tray; Address - Oki mc760x User Manual

SETTING ITEMS (USER)

TRAY

1
You can set the paper size and paper type for each tray.
Memo
• For instructions on how to display the TRAY screen, see the
following page:
 P.229 "Accessing the User Menu"
1
On the TRAY screen, press the portion of
2 the illustration corresponding to the tray
whose paper size you want to change, and
press the desired paper size button.
3
In models that can automatically detect the paper size,
4
selecting [AUTO(mm)] or [AUTO(inch)] instead of the
paper size button allows you to automatically set the size
of the paper placed in the trays. Press [AUTO(mm)] when
using A/B format paper such as A4, and [AUTO(inch)]
when using LT format paper such as LT.
Note
• The displayed buttons differ depending on the model.
5
• The equipment may fail to detect the paper size and
displays the "!" mark if the LT format paper is placed in
the tray for which [AUTO(mm)] is set or vice versa. In
this case, correct the selected button.
If you want to change the paper type from plain paper to
another or want to specify the purpose of use of the paper
in the tray, press [PAPER TYPE] and proceed to step 2. If
6
you do not need to set paper type, press [OK] and
complete the operation.
7
2
Press the portion of the illustration
corresponding to the tray whose paper type
you want to change and press the desired
paper type button, then press [OK] to
complete the settings.
The PAPER TYPE screen consists of two sections:
THICKNESS and ATTRIBUTE.
Set THICKNESS when using thick paper and recycled
paper.
Set ATTRIBUTE when using the paper in the tray for a
specific purpose. For example, if you select [INSERT] for
a tray, the paper in the tray will always be used for copy
insertion.
Note
• The displayed buttons differ depending on the model.
Memo
• Paper placed in a tray set with THICKNESS other than
[PLAIN], or paper placed in a tray set with ATTRIBUTE
other than [NONE] is out of the scope of the Automatic
Paper Selection (APS).
For details of APS, refer to the Basic Guide.
• When an attribute other than [NONE] is set for a tray,
the paper placed in this tray is out of the scope of the
Automatic Change of Paper Source function.
For details of this function, see the following page:
 P.231 "COPY"

ADDRESS

This menu allows you to perform the following operations:
 P.238 "Managing contacts in address book"
 P.243 "Managing groups in address book"
Memo
• For instructions on how to display the ADDRESS BOOK
menu, see the following page:
P.229 "Accessing the User Menu"

- 237 -