DAELIM S2 125 Service Manual page 175

Hide thumbs Also See for S2 125:
Table of Contents

Advertisement

STARTER SYSTEM
BATTERY ⊕ CABLE
STARTER MAGNETIC SWITCH
STARTER MAGNETIC SWITCH
STARTER MAGNETIC SWITCH
WIRE CONNECTOR
16-6
STARTER MOTOR CABLE
STARTER MAGNETIC SWITCH
REMOVAL
● Release the seat lock with the main key.
● Remove the luggage box. (⇨3-3)
● Remove the center cover. (⇨3-3)
● Remove the battery (+) cable from the starter magnetic
switch terminal.
● Remove the starter motor cable from the starter
magnetic switch terminal.
● Disconnect the yellow / red connector and green /
yellow connector from the wire harness.
● Remove the starter magnetic switch from the switch
setting bracket securing the frame.
● Install in the reverse order of removal.
INSPECTION
● Check if the starter magnetic switch "clicks" when it is
turned ON.
-Clicks
→·Poorly connected battery terminal and
motor terminal of the switch. (Check
the starter magnetic switch)
-No clicks →·No starter magnetic switch input
voltage. (Faulty relay ground line and
starter magnetic switch)
Starter magnetic switch voltage
● Measure the voltage between the yellow / red wire (+)
and ground at the starter magnetic switch connector.
● If battery voltage appears only when the starter switch
is pressed, it is normal.
Starter magnetic switch ground line
● Disconnect the wire connector from the starter
magnetic switch and check for continuity between the
ground wire (green / yellow) and ground.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents