Table of Contents
Advertisement
EX. VALVE
ROCKER ARM
EX. ROCKER
CAM SHAFT
ARM SHAFT
HOLDER
CAM SHAFT
"T" MARK
IN. VALVE
ROCKER ARM
IN. ROCKER
ARM SHAFT
CAM CHAIN
CYLINDER
HEAD
CYLINDER HEAD / VALVE
CAMSHAFT ASSEMBLY
● Apply engine oil to the rocker arm shaft, and assemble
the rocker arm to the camshaft holder.
● Tighten the rocker arm shaft with 6mm bolts, and align
the bolt hole of the camshaft holder with the fitting
side of the rocker arm shaft.
● Check the camshaft assembly for abnormal condition,
and place it on the cylinder head.
● Put the cam chain on the cam sprocket.
● Slowly rotate the crankshaft counterclockwise, and
align the "T"mark of the flywheel with the index
mark of the RH. crank case cover.
·Take precautions not to allow the cam chain to come
off the camshaft timing gear while turning the
camshaft.
9-13
Hide quick links:
Advertisement
Chapters
Table of Contents
