Using The Web Menu - Sony PMW-400K Operating Instructions Manual

Network Type (connection mode): "Infra"
Ch (channel): "Auto"
Authentication (network authentication):
Depending the settings on the computer,
"Open," "Shared," "WPA," or "WPA2"
Encryption (data encryption): Depending the
settings on the computer, "Disable,"
"WEP," "TKIP," or "AES"
WEP Key Index (key index): "1" when
"Encryption" is set to "WEP"
Input Select (key input format): Depending
the network key (or security key),
"ASCII5," "ASCII13," "HEX10," or
"HEX26" when "Encryption" is set to
"WEP," "ASCII8-63" or "HEX64" when
"Encryption" is set to "TKIP" or "AES"

Using the Web Menu

You can operate the Web menu built in the
camcorder from a computer when it is connected
to the camcorder via a Wi-Fi connection.
You can check the information and setting status
of the camcorder, and upload a planning metadata
file, using the Web menu.
Note
You cannot access the Web menu during recording/
playback. (You cannot send/receive files via a Wi-Fi
connection.)
Example Web menu
Product Information
• Model name
• Serial No.
Network
• MAC Address
• IP Address
• Subnet Mask
Wi-Fi Status
• Wireless Mode
• SSID
• Type
• Channel
• Authentication (network authentication)
• Data Encryption (data encryption)
Planning Metadata
Clicking "Upload" displays the Planning
Metadata screen which allows upload of a
planning metadata file (see page 81).
Note
The configuration of items displayed in the Web menu
varies depending on the browser you are using.
To display the Web menu
1
Launch a web browse on the computer,
and navigate to "http://<camcorder's
IP address> (setting of
"MAINTENANCE" > "Network
Setting" > "IP Address" in the setup
menu)".
Example (when the IP address is
"192.168.1.10"):
Type "http://192.168.1.10/" in the address
bar.
If the connection is complete, a dialog
appears asking you to enter the user name
and password.
2
Enter the user name and password, and
click "OK."
User name: admin
Password: pmw-400 (Lower-case the model
name.)
To upload a planning metadata file
1
Insert a media such as an SxS memory
card.
2
Click "Upload" in the Web menu.
The Planning Metadata screen appears.
3
Click "Select" to show Choose File
dialog.
4
Select the planning metadata file you
want to upload, and then click "Open."
The path of the selected file appears.
5
Click "Execute."
The planning metadata file is loaded into the
camcorder's memory and stored in the
media.
"OK" appears in the Status field when the
transfer is complete.
Using Wi-Fi Connection 81