Functions That Can Be Assigned To The Ret Button On The Lens - Sony PMW-400K Operating Instructions Manual

Functions That Can Be Assigned to the RET Button on the Lens

Assignable switch setting Function
Off
Lens RET
a)
Return Video
Rec Review
Shot Mark1
Shot Mark2
Clip Flag OK
Clip Flag NG
Clip Flag Keep
OK Mark
Focus Mag
Flashband Reduce
Quick Backup
USB Thumbnail
a) When the digital extender function is turned on, it is
not possible to show the return video.
162 Assigning Functions to Assignable Switches
No assignment
Display return video signals when the optional CBK-
CE01 is installed and a camera control unit is connected.
When a camera control unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review (if
playback is allowed).
Display return video signals when the optional CBK-
CE01 is installed and a camera control unit is connected.
Execute recording review.
Write Shot Mark1.
Write Shot Mark2.
Add/Clear an OK flag to/from the clip being recorded or
played.
Add/Clear an NG flag to/from the clip being recorded or
played.
Add/Clear a KP flag to/from the clip being recorded or
played.
Add or delete an OK mark.
Turn the focus magnification function on or off.
Turn the flashband reduce function on/off.
Back up all the clips in the selected SxS card collectively
to a USB media.
Display the thumbnail screen of a USB media.
State when camcorder
is next powered on
—
—
—
—
—
—
Setting not retained
Setting not retained
Setting not retained
—
Setting not retained
Setting not retained
Setting not retained
Setting not retained