Defining Shot Mark Names In Planning Metadata - Sony PMW-400K Operating Instructions Manual

to the Operating Instructions supplied with the CBK-
WA01.
To set clip names
Load a planning metadata file that contains clip
names into this camcorder, select
"OPERATION" > "Clip" > "Auto Naming" (see
page 127) in the setup menu, then select "Plan."
Each time that you record a clip, the camcorder
automatically generates a name consisting of the
clip name defined in the planning metadata file,
with the addition of an underbar (_) and a four-
digit serial number (0001 to 9999).
Examples: Typhoon_Strikes_Tokyo_0001,
Typhoon_Strikes_Tokyo_0002, ...
Note
• When the serial number reaches to 9999, it returns to
0001 with the next recording operation.
• When you load another planning metadata file, the
serial number returns to 0001.
Defining Shot Mark Names in
Planning Metadata
When you use planning metadata to set shot
marks, you can define names for Shot Mark 0 to
Shot Mark 9.
When you record shot marks, you can add the
shot mark name strings defined in the planning
metadata.
Note
Shot Mark 1 and Shot Mark 2 can be recorded on the
camcorder. Shot Mark 3 to Shot Mark 9 and Shot Mark
0 can be recorded by operation from a computer which is
connected with the camcorder via Wi-Fi.
Shot mark name string example
Use a text editor to modify the fields in the < Meta
name> tag.
The shaded fields in the example are essence
mark name strings. Names can be either in ASCII
format (up to 32 characters) or UTF-8 format (up
to 16 characters).
"sp" indicates a space and 3 indicates a carriage
return.
Note
If a name string contains even one non-ASCII character,
the maximum length of that string is 16 characters.
<?xml version="1.0" encoding="
sp sp
UTF-8"?>3
<PlanningMetadata xmlns="http://
xmlns.sony.net/pro/metadata/
planningmetadata" assignId="
sp
H00123" creationDate="
sp
2011-04-15T08:00:00Z"
sp
2011-04-15T15:00:00Z"
sp
"1.00">3
<Properties propertyId=
sp
"assignment" class="original"
sp
update="2011-04-15T15:00:00Z"
modifiedBy="Chris">3
<Title usAscii="Football
sp
Game" xml:lang="en">
sp
Football Game 15/04/2011</
Title>3
<Meta name="_ShotMark1"
sp
Goal
content=" "/>3
<Meta name="_ShotMark2"
sp
Shoot
content=" "/>3
<Meta name="_ShotMark3"
sp
Corner Kick
content="
<Meta name="_ShotMark4"
sp
Free Kick
content="
<Meta name="_ShotMark5"
sp
Goal Kick
content="
<Meta name="_ShotMark6"
sp
Foul
content=" "/>3
<Meta name="_ShotMark7"
sp
PK
content=" "/>3
<Meta name="_ShotMark8"
sp
1st Half
content=" "/>3
<Meta name="_ShotMark9"
sp
content=" 2nd Half
<Meta name="_ShotMark0"
sp
Kick Off
content="
</Properties>3
</PlanningMetadata>3
Note
When you create a definition file, enter each statement as
a single line with a CRLF only after the last character in
the statement line, and do not enter spaces except where
specified, except within essence mark name strings.
You can use the Sony Planning Metadata Add-in
application software supplied with the CBK-WA01
Wi-Fi Adapter to Essence mark names. For details,
refer to the Operating Instructions supplied with the
CBK-WA01.
Planning Metadata Operations
lastUpdate="
version=
sp
sp
sp
sp
sp
"/>3
sp
"/>3
sp
"/>3
sp
sp
sp
sp
"/>3
sp
"/>3
95