Kenmore 795.51022.001 Service Manual page 93

9) Abnormal Cooling Fan Error
NO. CHECKING FLOW
1) Reset product.
2) Enter to TEST MODE 1 (press once TEST S/W
on Main PCB)
5
3) Remove Cover PCB.
4) Check voltage in CON 6 as shown in the pictures.
Disconnect Motor connector, and check status of
plated terminals.
6
Terminals contact surface must be free of rust and
dirt. Also, the terminals red with a T.P.A., Motor
wire must not have any damage.
Reset the product.
After 3 minutes execute DISPLAY CHECK MODE,
check the result.
7
RESULT & SERVICE ACTION
Result
(a) ~ (b) Normal
(b) ~ (c) Abnormal Change Motor
(a) ~ (b)
(b) ~ (c)
Result
Wire damage,rust, dirt,
TPA absences.
Normal appearance
Result
All Display
LED's are Normal
turned ON
Cooling Fan
Error Code Abnormal
appears
- 92 -
Service Action
Change Main PCB
Service Action
Change Main PCB
Go to Step 7
Service Action
Explain to the customer
Replace Cooling
Fan Motor